Power and signal ground IF Out: Users can simply plug it into a PDA or other type of. The output pulse is 1usec in duration. Under normal open-sky condition, position-fix can be achieved within approximately 35 seconds within 10 seconds if valid ephemeris data is already collected from recent use. The satellites are positioned so that we can receive signals from six of them nearly percent of the time at any point on Earth. If any items are missing or damaged, contact your dealer immediately. Proper adjustment of the 1PPS output to align with the GPS second requires calculation of the receiver clock offset and clock drift-rate as part of the position-velocity-time PVT solution.
|Date Added:||23 August 2009|
|File Size:||56.7 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
For your convenience If looking through the Haicom HIE user manual directly on naicom website is not convenient for you, there are two possible solutions: The receiver uses the. Users can simply plug it into a LaptopPC running with suitable mapping and routing software for navigation. General description of what GPS is and how it works. Upon re-acquiring enough satellites to generate consecutive valid position fixes, the 1PPS Valid Signal will become active again, signaling that the 1PPS output is again synchronized with the GPS second.
Haicom HIE User Manual | 31 pages
It satisfies a wide variety of applications for car navigation, personal navigation or touring devices, tracking and marine navigation purpose. They stations are located worldwide. The acquisition performance can be hi-203w significantly if the host initializes the receiver with a rough estimate of time and user position.
Table of Contents Add to my manuals Add. When three or fewer satellites are tracked, altitude-hold is enabled using the last computed altitude and 2D navigation mode is entered.
The serial port commands allow users to set the receiver parameters, configure output message type, and retrieve status information.
Haicom GPS Receiver HIE User Guide |
If the receiver is transported over a large distance across the globe, cold-start automatic-locate sequence is invoked. If you want to quickly view the content of pages found on the following pages of the manual, you can use them. When enough satellite signals are received to generate valid position fixes, the 1PPS output is adjusted to align with the GPS second in several seconds. The navigation data contains following hi-203ee The baud rate and protocol of the host COM port must match the baud rate and protocol of the GPS receiver serial port for commands and data to be successfully transmitted and received.
The option to print the manual has also been provided, and you can use it by clicking the link above – Print the manual. Users can simply plug it into a PDA or other type of handheld PC halcom with suitable mapping and routing software for navigation. The new settings will remain effective on next power-on as long as the on-board rechargeable backup battery is not discharged.
You do not have to print the entire manual Haicom HIE but the selected pages only. If the receiver is transported over a large distance across the globe, cold-start automaticlocate sequence is invoked.
Comments to this Manuals Haico Name.
Haicom HI-203E Manuals
The default receiver protoc Summary of the content on the page No. With signal blockage or rising and setting of the satellites, where a change in satellite constellation used for position fix occurred, large position error may result.
The HIE is optimized for good performance and low cost. Home Company Support Contact. They are continuously monitored by ground stations located worldwide.
GPS Global Positioning System is the only system today able to show you your exact position on the Earth anytime, in any weather, anywhere. Many people prefer to read the documents not on the screen, but in the printed version. Vcc, Power supply input, 3.
After receiver position has been calculated, valid position, velocity and time information are transmitted hxicom the on board serial interface. The new settings will remain effective on next power-on as long as ih-203e on-board rechargeable backup battery is not discharged.
As soon as GPS signal is acquired and haciom, the HIE will transmit valid navigation information through its serial interface. When haiclm or fewer satellites are tracked, altitude-hold is enabled using the last Summary of the content on the page No.
GPS applications also include keeping track of where a fleet of trucks, trains, ships or planes are and how fast they are moving; directin gemergency vehicles to the scene of an accident; mapping where a city’s assets are located ; and providing precise timing for endeavors that require large-scale coordination.